HYPOID HELIXFORM GEAR FINISHER MACHINE GLEASON 607....

HYPOID HELIXFORM GEAR FINISHER MACHINE GLEASON  607....

Specification : 

CAPACITY:
 Max pitch diameter: 10:1 ratio............ 10.5 inch           266 mm
     2.5:1 ratio............ 9.375  inch             238 mm
 Coarsest diametral pitch.................. 2.5 D.P.  10 Module
 Min extreme ratio......................... 2.5:1
 Max face width............................ 1.625  inch     41 mm
 Max depth................................. 0.75 inch              19 mm
 Number of teeth........................... 20 - 150
 WORKSPINDLE:
 Diameter of taper hole at large end....... 3 27/64 inch  
 Taper per foot............................ 1/2 inch  
 Depth of taper............................ 5/8 inch  
 CUTTER DIAMETERS.......................... 5, 6, 7.5 & 9 inch  
 FEEDS & SPEEDS:
 Cutter speeds............................. 10' - 75'-min 3 - 22 m-min
 Feeds..................................... 2 - 8 sec/tooth
 ELECTRICAL:
 Main motor................................ 7.5 HP @ 1500 rpm
 Hydraulic motor........................... 3 HP @ 1500 rpm
 Coolant motor............................. 1.5 HP @ 1500 rpm
 Magnetic chip separator motor............. 0.125 HP @ 1500 rpm
 NETT WEIGHT............................... 13,500 lbs  6,123 kg

 Complete with:-
  Stock divider.
  Hydraulic chucking.
  Bore inspection device.
  One set of speed gears to cut one gear.
  HELIXFORM finishing gears.
  Index arrangement to cut one gear.
  Compensating cam.
  Helixform cam.
  Chip conveyor having magnetic separator.
  Guards.
  Coolant.
  Electrics 380, 3, 50. (Dual wired)
  METRIC machine.